Switcher

Name: Switcher
Works on: windows

Windows XP and above

Developer: DXsoft

Version: 2.1
Last Updated: 18 Feb 2017
Release: 09 Nov 2006
Category: Internet > Remote Utils

Rate this software:
305 downloads

View Screenshots(1)

Comments

Download

Liked it? Tell others:

Switcher Tags

CD/DVD-ROM Drives open drive open remotely open close drive ROM

Switcher Details

Rating: 1.913043478 out of 5 based on 23 user ratings

Downloads: 305
License: Free

Switcher is a free software by DXsoft and works on Windows 10, Windows 8.1, Windows 8, Windows 7, Windows XP, Windows 2000, Windows 2003, Windows 2008, Windows Vista, Windows 2012.
You can download Switcher which is 473.8 KB in size and belongs to the software category Remote Utils.
Switcher was released on 2006-11-09 and last updated on our database on 2017-02-18 and is currently at version 2.1.

Thank you for downloading from SoftPaz! Your download should start any moment now. It would be great if you could rate and share:

Rate this software:
Share in your network:

Switcher Description

DXsoft Switcher is a simple software to handle devices connected to an LPT-port.
The “1” button erects a logical one at pin 2 of an LPT-port while the “2” button sets high level at pin 3 and so on.
The program can be launched with several command line parameters.
The /LPTn parameter defines used LPT-port (/LPT1 , /LPT2 or /LPT3). LPT1 is used by default.
The /LPTxNNNN parameter defines LPT-port with non-standard base address (for example, LPT-port at PCI-card). There NNNN is hexadecimal base address of a port, x is just letter x, not number.
The /M parameter enables to switch on several switches at one time.
The /Sx parameter define a switch switched on at the program start (/S1 ... /S8). /S0 means "all switches are off". To switch on several switches use several /Sx commands.
The /Ttext parameter defines a title of program window.
The /B1text ... /B8text parameters define text on button 1...8 respectively.
The /Ontop parameter puts Switcher in front of all windows.
The /EX parameter means "to set switches and close program".

Switcher Screenshots

Similar Software