arcDev Mainliner X2

The arcDev Mainliner X2 application was developed to be a triple-oscillator monosynth designed specifically for just this. Each of the 3 Osc groups is made up of three detunable suboscillators, so if you want you can quickly dial up a huge warbling chunk of hoov. Add an 8-pole LPF and 4-pole BPF, and watch the speaker cones wobble.
Theres a whole lot of modulation and wave-mangling options though, so you can get other sounds with it, too.
MLX2 is optimised for bottom-of-the-keyboard playing. It may well work as a lead-type synth, for all I know. YMMV.
Oscillator Bank
Three Oscillator groups (A/B/C), each of which is made up of three sub-oscs. Waveform for each sub-oscillator may be independently set, and suboscs may be detuned against each other.
OscGrp B & C may be set to hard-sync to, or be frequency-modulated by, subosc 1 of OscGrp A. If either oscgrp is set to FM, OscGrp A main output is muted, and its LVL control is re-routed to adjust FM Depth.
Additionally, OscGrps B & C are sent through an adjustable-level Ring Modulator. Standard White-noise generator is also present.
Filter Bank
Two independent filters. Filter A is switchable 4pole / 6pole / 8pole Low-Pass. Filter B is switchable 2pole / 4pole Band-Pass or High-Pass.
Filter routing may be switched between three modes:
- Parallel
Signal passes seperately through Filters A & B.
Mix controls A/B Mix.
- Multi
Signal passes though Filter A, then is split - one signal passes to the output, while the other passes through Filter B.
Mix controls A/A+B mix.
- Serial
Signal passes through Filter A, then Filter B. Mix is disabled.
Envelope Generators
Four velocity-sensitive (H)ADSR generators. Env A is hardwired to main amplitude, Env B is hardwired to Filter A Cutoff. Env B & C can be freely assigned to most parameters.
Env B, C & D feature adjustable Pre-Hold (delay) time & bipolar velocity and mod depth. Env A features unipolar velocity.

Lfo Generators
Three tempo-syncable assignable Lfo generators.
Smooth/Quantize control modifies Lfo wave shape:
Negative values smooth sharp transitions (useful for smoothing out a random waveform).
Positive values quantise smooth transitions (useful for stepping a sine or triangle waveform).System requirementsVST Host